BSAX200TFR

Boundary Shield

The Boundary Shield range of Wireless Active Infra Red Beams enable fast, flexible installations with low maintenance and costs.

Luminite battery powered wireless Active IR beams are fitted with Genesis transmitters and are compatible with all Luminite Genesis wireless products enabling long range communication up to several kilometres. The combination of active IR and wireless communication makes this an ideal solution for large circumference perimeter detection.

Active beams come in two detection ranges (60 metre & 100 metre) and with either fixed or adjustable frequency control to avoid cross talk between beams. Both the 200 and 350 types of beams may be used as Stand Alone or mounted inside a tower by detaching the transmitter and battery enclosure.

Long battery life is achieved by specialised low power circuitry and the use of Lithium batteries. Low battery warning is transmitted to the receiver which can then be indicated locally or remotely by email alert or via the ARC. Wireless communication is secure and robust by way of poling and rolling codes.

Accessories

  • BSAXBT (360°) & BSAXWMT (180°)

    Beam towers for AX and SL models

  • BSTFS

    Single-sided tower base - for use with the BSAXWMT tower when the ground is soft

  • BSTF

    Double-sided tower base - for use with the BSAXBT tower when the ground is soft

  • BSTK350

    Adaptor kit for tower mounting BSSL350 beams

  • BSMP2

    Mounting kit for BSAX dual beams only

  • BSMP4

    Mounting kit for BSSL quad beams only

  • LSH20

    SAFT 3.6-volt lithium D cell battery (each beam requires 4 batteries)

BSAX200TFRLBSSL350QNRLBSSL350QFRL
Maximum detection range60m100m100m
Transmitter frequency434.525Mhz 10mw434.525Mhz 10mw434.525Mhz 10mw
Transmission1km1km1km
Detection methodInfrared beam interruption detectionQuad infrared beam interruption detectionQuad infrared beam interruption detection
Selectable beam frequency4 ChannelFixed4 Channel
Interruption timeVariable between 50/100/250/500ms (4 steps)Variable between 50/100/250/500ms (4 steps)Variable between 50/100/250/500ms (4 steps)
Power source3.6V, 13.0Ah: (4) LSH20 lithium batteries manufactured by SAFT3.6V, 13.0Ah: (4) LSH20 lithium batteries manufactured by SAFT3.6V, 13.0Ah: (4) LSH20 lithium batteries manufactured by SAFT
Current draw810μA Transmitter: 490μA + Receiver: 320μA (at 25°C, 3.6VDC)745μA. Transmitter: 420μA + Receiver: 325μA (at 25°C, 3.6VDC)745μA. Transmitter: 420μA + Receiver: 325μA (at 25°C, 3.6VDC)
Battery lifeTransmitter: Approx 3 years
Receiver: Approx 5 years
Transmitter: Approx 4 years.
Receiver: Approx 5 years
Transmitter: Approx 4 years.
Receiver: Approx 5 years
Alarm outputTransmittedTransmittedTransmitted
Alarm period2 sec (±1) (Nominal)2 sec (±1) (Nominal)2 sec (±1) (Nominal)
Tamper outputTransmittedTransmittedTransmitted
Low battery outputTransmittedTransmittedTransmitted
Low battery indicatorLEDLEDLED
Operating temperature-20°C – +60°C (-40°F – 140°F)-20°C – +60°C (-40°F – 140°F)-20°C – +60°C (-40°F – 140°F)
Alignment angle±90° Horizontal, ±10° Vertical±90° Horizontal, ±10° Vertical±90° Horizontal, ±10° Vertical
Ingress ProtectionIP54IP54IP54