ESR8+8 & ESEM8
16 zone Wireless Receiver
The ESR8+8 is a wireless receiver designed to work with Easyswitch transmitters and PIR detectors. Supplied with 8 zones as standard, a further 8 zones can be added using an ESEM8 module to provide the maximum of 16 zone outputs.
ESD Easyswitch Wireless PIR Detectors will operate up to 500m from the receiver and are ideal for integration with CCTV systems that are to be event driven. NB: Longer ranges in excess of 500m require an alternative external antenna (AE434).
The receiver has 8 volt free relays which are conveniently brought out to screw terminals along the front edge of the circuit board and the expander board ESEM8 has the same features.
An external inhibit feature can be used to disable the alarm relays in groups or globally. Inhibit is also possible by using an ESF1 KeyFob and an ESEM8 module but it will reduce the number of outputs to 15. There are two additional relays which can be programmed to provide a grouped or global alarm output as well as day/night and global or grouped inhibit as required.
Easy programming is facilitated by way of an LED display and programming buttons. EPROM memory stores all learned devices and enables restoration of the alarm status in the event of a power interruption.
Click to enlarge images
Features and Specifications
| Supply | 5 – 24 volts DC |
| Power Consumption | 12 V DC 117ma max 8ma min. (All relays and LED’s off) |
| Frequency | 433.92Mhz |
| Antenna | ¼ wave (supplied) |
| Optional compatible antenna | AE434 or AE434MAGNETIC |
| Wireless reception range | 1Km line of sight from an ESD PIR if used with AE434 |
| Zone outputs | 8 |
| Zone outputs with ESEM8 | 16 |
| Zones inhibit | Hard wired or wirelessly using an ESF1 Key Fob Grouped or globally |
| Two auxiliary outputs | May be configured as Global or group alarm outputs. Day/Night output and global or grouped inhibit |
| Temperature range | -10 to +60 °C |
| Weather rating | IP66 |
| Enclosure | UV stable ABS |
| Dimensions | W170 x H120 x D55mm |